
AGILINK OmniHand 3 Ultra Dexterous Hand (Tactile)
The AGILINK OmniHand 3 Ultra is the flagship: 21 active degrees of freedom, a 0.4 s open-close cycle and ±0.1 mm repeatability. Sensing is full-hand piezoresistive 1D tactile across the fingers, the pads and the palm. Order a single left or right hand, or the matched pair.
Compatibility
Compatible with:
Product Description
AGILINK OmniHand 3 Ultra — Flagship Dexterous Hand, Full-Hand Tactile Sensing
The AGILINK OmniHand 3 Ultra is the top of the AGILINK range: 21 active degrees of freedom, every one directly motor driven, in a 900 g hand that grips a rated 3 kg and lifts 8 kg. Fingertip repeat positioning is ±0.1 mm and a full open-close cycle takes 0.4 s. This is the hand for dexterous manipulation research, teleoperation and in-hand work a tendon-driven five-finger design cannot do.
This listing is the Tactile model. Sensing is piezoresistive full-hand one-dimensional tactile across the fingers, pads and palm, resolving to 0.1 N over a 0–20 N range, triggering from about 5 gf. The hand reports contact force everywhere it touches.
Why the OmniHand 3 Ultra
Twenty-One Active Joints, Directly Driven. Not a four-motor hand with passive linkages — full independent articulation, which is what in-hand reorientation, tool use and fine assembly actually require.
Force Coverage Across the Whole Hand. Tactile sensing spread over fingers, pads and palm rather than concentrated at the fingertips. For grasp stability, in-hand repositioning and knowing when a part has seated, breadth of contact data matters more than resolution at a single point.
3 kg Gripped, 8 kg Lifted. Rated grip of 3 kg with an 8 kg lifting capacity, on 48 V with CAN-FD and Ethernet, across a −10 to 45 °C operating range and OTA firmware upgrades.
Left, Right or the Matched Pair. Order a single left or right hand, or the matched pair.
Key Features of the OmniHand 3 Ultra (Tactile)
- 21 active DOF — direct motor drive, 21 total DOF
- 210 × 94 × 48 mm, ≤900 g
- Rated grip 3 kg · lifting capacity 8 kg
- 0.4 s opening and closing time
- ±0.1 mm fingertip repeat positioning accuracy
- Piezoresistive 1D tactile — full hand, 0.1 N resolution, 0–20 N sensing range
- 48 V operating voltage (20–67.2 V)
- CAN-FD and Ethernet communication interfaces
- −10 to 45 °C operating range, OTA firmware upgrade supported
- ROS 2, Python and C++ SDK
- 6-month warranty
- Sold individually or as a matched pair
A Note on AGILINK
AGILINK is AGIBOT’s dexterous manipulation arm. Every hand and gripper in the AGILINK range ships with a Python and C++ SDK and runs under ROS 2.
Also Available: the Rest of the AGILINK Range
The OmniHand 3 covers most manipulation work at 16 total DOF and 3 kg with 1D tactile sensing, for a fraction of the Ultra’s price. The OmniHand 3 Lite-S drops to 350 g for half-scale platforms, and the OmniPicker 3 gripper handles straight pick-and-place at 140 N and 5 kg maximum.
Specifications subject to change. Figures reflect AGIBOT’s quotation of 1 November 2026 and the AGILINK flyer of 3 November 2026. For custom configurations or volume pricing, contact sales@robostore.com.
Pairs Well With
Frequently Ordered Together

AGILINK OmniHand 3 Ultra Dexterous Hand (Tactile)
AGILINK OmniHand 3 Ultra Specifications
Part Info
- Part Name: AGILINK-DexHand-OmniHand 3 Ultra (Tactile)
- Type: Flagship dexterous hand, full-hand tactile sensing
- Sides: Left, right, or a matched pair
- Spec Basis: AGIBOT quotation of 1 November 2026; sensing from the AGILINK flyer of 3 November 2026
Physical
- Degrees of Freedom: 21 active / 21 total
- Dimensions: 210 × 94 × 48 mm
- Weight: ≤900 g
- Drive Type: Direct motor drive
Performance
- Opening / Closing Time: 0.4 s
- Fingertip Repeat Positioning Accuracy: ±0.1 mm
- Load Capacity: 3 kg rated grip, 8 kg lifting
Sensing
- Sensor Type: Piezoresistive one-dimensional tactile
- Coverage: Full hand — fingers, pads and palm
- Force Resolution: 0.1 N
- Sensing Range: 0–20 N
- Minimum Trigger Force: approx. 5 gf
Integration
- Operating Voltage: 48 V (20–67.2 V)
- Communication Interfaces: CAN-FD, Ethernet
- Operating Temperature: −10 to 45 °C
- Firmware Upgrade: OTA online upgrade supported
- Developer Support: ROS 2, Python and C++ SDK
- Warranty: 6 months
Key Features
FAQs
Which build of the OmniHand 3 Ultra is this?
AGIBOT’s AGILINK flyer of 3 November 2026 lists a single OmniHand 3 Ultra — 21 active degrees of freedom, 900 g — in three sensing configurations: non-tactile, tactile and vision-tactile. This listing is the tactile build, and it is the only one we stock.
How does it differ from the OmniHand 3?
21 active degrees of freedom against 10 active and 6 passive, a 0.4-second open and close against 0.5, and ±0.1 mm repeat positioning against ±0.3 mm. It reads contact force across the whole hand, where the OmniHand 3 publishes a sensor type but no array. It is heavier, at 900 g against 570 g, and it grips a rated 3 kg with an 8 kg lifting capacity.
Is this sold as a pair?
It is sold as a single hand. Choose left or right. Order both for a pair.
What tactile sensing does it carry?
Piezoresistive one-dimensional tactile sensing across the fingers, the pads and the palm, resolving to 0.1 N over a 0–20 N range and triggering from about 5 gf.
Who supports it in the United States?
Robo Inc. We are a US distributor for AGIBOT.
How It Works
Place Your Order
Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.
Setup & Configuration
Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.
Get Up and GO
Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.
Other End Effectors
AGILINK OmniHand 3 Ultra Dexterous Hand (Tactile)
AGILINK OmniHand 3 Dexterous Hand (with Tactile)
Degrees of Freedom
Weight
Payload
Repeat Accuracy
Open / Close Time
0.1 N Force Resolution
Max Payload
Max Force
Stroke
Weight
Repeat Accuracy
Full-Load Durability
AGILINK OmniHand 3 Lite-S Dexterous Hand (with Tactile)
Degrees of Freedom
Weight
Grasp Payload
Repeat Accuracy
Open / Close Time
0.1 N Force Resolution
Shop All AgiBot
Active DOF
Net Weight
Battery Capacity
Battery Life
Maximum Payload
Walking Speed
AGIBOT X2 Ultra Humanoid Robot
Active DOF
Net Weight
Secondary Development
Battery Capacity
Maximum Payload
Walking Speed
Active DOF
Weight (with Battery)
Battery Capacity
Battery Life
Max Payload
Top Speed
AGIBOT A3 Ultra Humanoid Robot
Active DOF
Weight (with Battery)
Secondary Development
Battery Capacity
Battery Life
Battery Swap
AGIBOT G2 Wheeled Dual-Arm Humanoid Robot
Active DOF
Weight
Secondary Development
Rated Payload per Arm
Arm Repeatability
Battery, 2 Packs

































