
AGIBOT X2 Humanoid Battery Pack (X2 Neo & X2 Ultra)
AGIBOT X2 Humanoid Battery Pack — Replacement Power for the X2 Neo and X2 Ultra
A second battery is the difference between a demonstration that runs all afternoon and one that stops halfway through. This is the replacement pack for the AGIBOT X2 Neo and X2 Ultra — roughly 500 Wh, good for about two hours of operation and a recharge from 15% to 100% in around 1.5 hours.
The X2 draws about 240 W in typical use, so a spare pack lets a lab, a classroom or a trade-show stand keep one battery on the charger while the other is in the robot. It is the same pack the robot ships with.
Why a Spare X2 Pack
Two Hours Is Two Hours. The X2 runs roughly two hours per charge. Recharging takes about 1.5 hours. With one pack the robot is off for 1.5 hours out of every 3.5; with two it is close to continuous.
No Downtime Mid-Session. Teaching blocks, open days and demo schedules do not pause for a charger. Swap the pack and carry on.
Fits Both X2 Builds. One part number covers the X2 Neo and the X2 Ultra.
Key Specifications
- ~500 Wh capacity
- ~2 hours of operation — AGIBOT’s published figure for the X2
- ~1.5 hour recharge — 15% to 100%
- Operating temperature −10 °C to 40 °C
- Fits AGIBOT X2 Neo and X2 Ultra — one part number for both builds, A10031023000
Compatibility
One pack, both builds. AGIBOT lists a single X2 battery pack — part A10031023000 — and specifies it as the same as the standard battery, so it fits the X2 Neo and the X2 Ultra alike. Both robots publish the same ~500 Wh capacity, ~2 hour runtime and ~1.5 hour recharge.
Specifications subject to change. All figures reflect AGIBOT manufacturer data current as of November 2026. For the most current information, custom configurations or volume pricing, contact sales@robostore.com.
Pairs well with





