
AGIBOT A3 Humanoid Battery Pack (A3 & A3 Ultra)
AGIBOT A3 Humanoid Battery Pack — Keep a Full-Size Humanoid Working
The AGIBOT A3 carries 1,152 Wh across two packs and runs about 10 hours on a mixed duty cycle of walking at 0.8 m/s and standing. The A3 Ultra, with 51 active degrees of freedom and a heavier compute stack, runs about 8 hours on the same system.
Both robots are built to swap packs rather than wait on a charger — the A3 Ultra in about ten seconds. A spare set is what turns an eight-hour robot into a robot that works a full shift and then another one.
Why a Spare A3 Pack
Swapping Beats Charging. A full charge takes under two hours. A swap takes seconds. If the robot is on a schedule, the spare pack is the schedule.
Built for Continuous Duty. The A3 Ultra is specified for 24/7 commercial operation with autonomous charging. Spare packs are part of how that number is reached.
Same Pack, Both Robots. The A3 and A3 Ultra share the 1,152 Wh battery system, so one spare covers a mixed fleet.
Key Specifications
- 1,152 Wh battery system — carried as two packs in the robot
- ~10 h runtime on the A3 — walking at 0.8 m/s : standing, 1:1
- ~8 h runtime on the A3 Ultra
- Charge time ≤ 2 hours
- Battery swapping supported — approximately 10 seconds on the A3 Ultra
- Autonomous charging on the A3 Ultra
- Charging input 110–220 V
- Fits AGIBOT A3 and A3 Ultra — one part number for both builds, A10011033003
Compatibility
One pack, both builds. AGIBOT lists this as the A3 / A3 Ultra battery pack — part A10011033003 — the same as the standard battery in either robot, so one spare covers a mixed A3 and A3 Ultra fleet.
Specifications subject to change. All figures reflect AGIBOT manufacturer data current as of November 2026. For the most current information, custom configurations or volume pricing, contact sales@robostore.com.
Pairs well with





